Tips for making builder cabinets look custom from Thrifty Decor Chick

Tips for making builder cabinets look custom from Thrifty Decor Chick

Here’s a reminder of what we started out with on this wall: 

folding table with fabric curtain
hid the kitty litter underneath
and the prime was meant to be a folding table. Haha! There was
hardly ever area to fold anything at all. As a lot as I have decluttered and arranged in
our property, we still needed a place for several things about the home. A whole lot of
them ended up on this counter! 
unfinished drawer cabinets

They are the essential unfinished cabinets you can locate at any large hardware

Ikea herringbone butcher block

This article may well contain affiliate inbound links for
your convenience. 

After that it was time to adjust up all those essential cabinets into some thing more
customized. I had a program to completely transform the drawer fronts to match the easy Shaker
layout of our uppers. 

On the internet it looked like the drawer fronts have been wholly flat. But when I
picked them up I understood they experienced a slight bevel to them: 

unfinished cabinet drawer fronts

With that bevel my prepare wasn’t likely to get the job done. I sat on it for a couple weeks
to determine out what I desired to do. I eventually resolved I would establish new
drawer fronts out of mdf and incorporate the slim trim on the front. 

But as I was on the lookout at the drawers a single working day, I experienced an thought. I wondered if I
could just convert them all over and have the flat side facing out. I took one particular
off, flipped it close to…and really favored it! The bevel appeared fine turned
back from the cupboards, and the again side gave me a good flat floor to
work with. Indeed! This was likely to be way considerably less function and revenue. 

When I had that figured out, it was time to start off painting. I took off each individual
drawer front (there are screws inside the cabinet drawers) and laid them in
buy on the counter. Before I started off painting, I used a drill little bit to drill
by means of the holes wherever the screws went so I could attach them back on in
the correct same spots.  

Just like my warning
when setting up cupboard hardware, be certain to drill straight by way of from the top of the drawer, not at an
angle. If it is really at an angle they will not likely attach the exactly the very same and be

Then I filled the holes on the new “fronts” and started out painting: 

how to paint cabinets by hand
You may realize this coloration! I have utilised this Cyberspace paint shade in our
eating location
loved ones room. I Enjoy it! It can be a lovely navy/grey coloration. 

Soon after the drawers had two coats each (and a gentle sanding concerning), I
begun on my trim parts. I wanted them to be as clean as probable, so
in its place of the lattice I commonly use for projects like this, I picked up
some four foot poplar strips that experienced quite minor grain: 

poplar trim for cabinet fronts

They are a quarter inch thick by two inches large. At first, I created the
mistake of starting to incorporate these to the drawer fronts even though they were being off
the cabinets. It was a lot easier to work that way, but I identified it was improved to
do install the trim when drawers were being in put. 

It really is considerably less difficult to make confident the sides of each individual cupboard are accurately the very same
if you insert them while they are put in. Or else even the slightest change
in height or width from a person drawer front to the other will be

I glued and nailed each individual strip onto the drawer fronts: 

how to add custom trim to cabinet fronts

I experienced already painted the body of the cabinets with the drawer fronts gone
— that section goes extremely rapidly. 

It was as I was setting up the fronts that I understood the paint sheen I experienced
used (that was leftover) was satin. I wished semi gloss — so I gave
every thing one particular more coat in the semi-gloss instead. (I told you this room
has supplying me many fits!): 

DIY shaker drawer fronts

acrylic brass cabinet hardware

But I retained hesitating on putting in them, and at last resolved they felt a
tiny also modern for this area (or our property seriously). 

dark blue cabinets with brass hardware

They are a lot more sizeable and search SO fantastic versus the dark, dusty blue!

adding custom trim to end of basic cabinets

I was careful with my picture angles simply because I’ll be exhibiting you the tile next,
and it is SO really! 🙂 

Here is where we commenced with this wall a few weeks back:

folding table laundry room

In this article it was with the upper and reduce cabinets installed:  

cabinets in laundry mud room

And in this article they are painted, trimmed out and with a very little brass bling!: 

cyberspace cabinets with brass hardware

dark wood counters blue cabinets

I just adore that dim wood, moody blue and brass combo. It appears like a piece
of home furniture, and I adore that! Even nevertheless the Do-it-yourself tasks in below have specified
me problems, they have all been really worth it! This has become the prettiest room in
our residence by significantly. ?

I am going to be back this 7 days to share the tile and install! 

Right here are hyperlinks to products and solutions and Do-it-yourself initiatives pictured in this
put up: 

Source link