Hello there there! After a extended summer slumber, I am back at it with a bunch of
DIY’s! If you have examine TDC for awhile, you know that I turn into a sloth in
the summer months. I consider to battle it but it truly is a little something that comes about every single 12 months. I
sluggish down and adore it. 🙂
The 2nd the temps begin to awesome down a little bit I’m back at it with tons of
suggestions and initiatives! This Do it yourself vent hood is an update I have been scheduling for a prolonged
We had a metallic vent hood that arrived typical with our kitchen. I thought of a
wooden vent hood when we constructed, but I wanted to see how we preferred this for
That kitchen experienced far more of a farmhouse experience and that style suit in
Above time I was lacking that additional tailor made touch in our existing kitchen area. You can find no
mistaken or correct listed here — the metallic vent hood looked excellent! But I realized I could
add some character with this job.
I had a style and design in intellect that was a small a lot more fashionable. I also had an
thought that would make it possible for me to construct the entire matter devoid of drilling
into the tile backsplash. (In scenario we ever have to have/want to just take it down.) These sorts of assignments are so enjoyable for me — it is
like placing a puzzle collectively as I go!
My system known as for taking away all of the trim and crown on the sides of the
I took these off and when I went to get rid of the crown I hit a hiccup I will
explain to you about in a moment.
I minimize down two matching pieces of wooden that would turn out to be the sides of the
vent hood. At the prime I nailed in a 1×2 that I was heading to use to secure
these pieces into the ceiling:
As you can see, I still left some space (the thickness of the boards I was using) at
the entrance of every single piece. A lot more on that in a moment!
The crown arrived down pretty effortlessly, and I begun to work on the little
trim underneath. It was then that I recognized that the trim was set up in advance of
the cabinets — it looked like the molding and cupboards had been installed from
the prime down. Waa waaaaa.
This threw my strategy out the window, so I experienced to appear up with a
new way to do this:
I was decided not to drill into the tile or grout. If you do not have tile or will not mind drilling into it, you could use a 1×2 in the wall and connect anything to that.
You can see in that photo over that I ended up securing the board into the
aspect of the cabinets, but down additional than I originally planned (I experienced to reduce the duration a little bit). Not a significant
deal, but I definitely required to have these secured into the ceiling as
This hood is not heavy — I used thin boards to make the entire thing. Cupboards
are produced to hold a good offer of weight, so even if this whole matter was
attached to just the cabinets, it would have been fantastic. I just wished it to
be as safe as achievable and I am going to share how I did that underneath!
This is exactly where my nerd tendencies appear out. 😜 I
sort of like figuring out remedies when I hit an problem. Following I added additional
1x2s to the base and the entrance — discover on the entrance I produced absolutely sure to leave
a gap (like I did at the leading) for the front piece to healthy in flawlessly:
I did this so I failed to have an unfinished edge exhibiting on the sides of the hood. Usually that wouldn’t be a big deal due to the fact I might go over them with trim, but for the reason that our cupboard doorways are so shut, that wasn’t an choice. (The doors would not open if I additional trim.)
It was beneficial that I preferred this to have a a little a lot more modern day layout. It
authorized me to create a box, which is way much easier than what we experienced at the old
I was imagining forward to carry on the crown all-around the best (by
coping the molding to match up from the present-day crown). So I included a little bit
of wood at the major that the crown could be nailed into:
That strategy changed later, but that further 1×2 was even now useful support.
I did this on each sides and then begun the supports throughout the
You can see right here how I designed a way to make this incredibly safe. I
screwed a board into the ceiling beams above. The entrance was later on attached
to that, so this issue is not heading anywhere. (I employed a level to determine out
the placement so the front panel would match completely from it.)
If you are applying thicker wooden for your box, you may possibly not want as many
supports across the entrance. I was likely as gentle as possible and only applying
quarter-inch thick luan for the entrance and that can get wobbly.
I hooked up the front piece, nailing it into the sides (the 1×2’s I confirmed
you earlier), the supports throughout the front and the header piece:
This submit may well contain affiliate inbound links for
I designed absolutely sure that the side pieces arrived out plenty of that we could however
get to within to hit the buttons on the entrance of the vent. I used a vent with the buttons on the base at our previous house.
I was left with an opening on the sides that I planned to insert crown
But as I was finishing it all up, we realized we preferred the uncomplicated style
with out the crown a whole lot.
So I finished up pulling this device out:
It truly is under no circumstances excellent, but I’ve advised you a million periods that caulk handles a
multitude of sins. )
I made use of some scrap luan as a header across the leading and then commenced introducing my
trim on the front with wide lattice parts from Menard’s:
Then the finishing touches of filling holes, sanding people down and
I’m a lover of distinction, so I was being pulled to building the hood the identical
color as the island. I understood instantaneously it was the proper transfer!
We definitely love how it turned out!!:
It makes the kitchen experience a lot more custom and adds the character I was
This is a view of how the sides appear just after working with the contour software:
The amusing point is, it suits in so properly, we hardly noticed it almost
quickly. It is really like it was often intended to be this way!
Our hood vents to the exterior and the intake vents are on the base. Make confident to
look into those facts if you endeavor this job!
Here is the shade formula for this grey coloration:
I used about $70 in wooden to do this undertaking — I used some scrap but
had to invest in most of it. Don’t forget you can have your wooden sheets lower down at the
components keep if you want support with that component.
Have you included a vent hood in your kitchen? You can see how we
did the far more standard vent hood design at our previous property if that fits in
much better with your house.
If I missed just about anything you might be questioning about, or if you have any inquiries,
make sure you enable me know!
You can store the products in this article under:
Pin this impression for afterwards!: